Risk analysis, assessment, and management is essential to any engineering field. This course is designed to provide students with an understanding of how to perform a comprehensive risk assessment applicable to a wide variety of engineering problems. The course will focus on failure mode and effect analysis, fault tree analysis, probabilistic risk analysis, and human reliability analysis. The course will also cover fundamental probability and statistics content.

This course provides the knowledge needed to effectively use Statistical Process Control (SPC). The relationship to quality costs, on-time delivery, concepts of variation, and an analysis of the organization-specific SPC applications will be introduced. Utilizing SPC to improve and maintain consistent production will be covered. The use of Lean manufacturing to shorten the time between the customer order and the product build/shipment by eliminating sources of waste will also be covered through the study of system performance, identification and elimination of waste, elimination of sources of variability, and a good understanding and use of the principles of operations management.

This guidebook was created by ISKME, in partnership with the Science Education Resource Center (SERC) at Carleton College. The document provides a practical reference for curators and authors of STEM OER, and contains 23 accessibility criteria, or elements, to reference as they curate, design and adapt materials to be accessible for STEM learners.

The primary audience of this resource is STEM postsecondary faculty, instructional designers, and others responsible for course design and pedagogy who seek to:

- Expand their knowledge about accessibility and ways to integrate it into their STEM curriculum and instruction
- Design openly licensed STEM courses and course materials that support both access and use by learners
- Curate existing STEM content that expands upon traditional textbooks and courseware to address variability in learning
- Identify and add meaningful keywords, or tags, to the STEM OER they create, so that their OER can be more easily discovered across platforms

Professional learning teams on campus are also encouraged to use this framework as part of training to facilitate integration of accessibility concepts into STEM course design and pedagogy.

The framework and guide development was supported by a mini-grant program facilitated by Bates College and the SCORE-UBE Network (Sustainability Challenges for Open Resources to promote an Equitable Undergraduate Biology Education), with funding from The William and Flora Hewlett Foundation. The framework and guide were developed by ISKME and SERC with input from 21 STEM faculty members from across the United States, and in collaboration with the project’s Working Group of accessibility experts: Andrew Hasley and Hayley Orndorf, both with BioQUEST’s UDL Initiative and the Quantitative Undergraduate Biology Education and Synthesis (QUBES) Project; Hannah Davidson, Plymouth State University; and Cynthia Curry, National Center on Accessible Educational Materials (AEM)/CAST.

This text covers the theory and application of discrete semiconductor devices including diodes, bipolar junction transistors, JFETs, MOSEFETs and IGBTs. It is appropriate for Associate and Bachelors degrees programs in Electrical and Electronic Engineering Technology, Electrical Engineering and similar areas of study. Applications include rectifying, clipping, clamping, switching, small signal amplifiers and followers, and class A, B and D power amplifiers. A companion laboratory manual is available. The text is also available in Open Document Text (.odt) format.

This book, Stability of Ships and Other Bodies, describes the fundamentals when and why floating bodies are stable. In addition, it describes steps that transforms un–stable bodies to stable. This book is designed to replace all the other books and inseminate that recent developed technology and advances. The material in standard books is so entrenched, old, and outdated material that one can be only amazed. For example, concept like potential stability is not discussed or even mentioned in any of all the books that this author review.

In dredging, trenching, (deep sea) mining, drilling, tunnel boring and many other applications, sand, clay or rock has to be excavated.The book covers horizontal transport of settling slurries (Newtonian slurries). Non-settling (non-Newtonian) slurries are not covered.

A smart grid is a range of technologies that allow for more complex interactions between the utility and consumer. This book provides an introduction to smart grids. It is written at the community college level for a student planning on earning an A.A.S. in electronics engineering technology. The math used in the book is at the pre-calculus leve, but does use complex numbers to explain some A.C. (Alternating Current) concepts.

The Soils Laboratory Manual, K-State Edition is designed for students in undergraduate, introductory soil science courses. The manual highlights the multidisciplinary aspects of soil science with laboratories focused on soil formation, classification, and mapping; soil physics, soil biology; soil chemistry; and soil fertility and management.

This book, Stability of Ships and Other Bodies, describes the fundamentals when and why floating bodies are stable. In addition, it describes steps that transforms un–stable bodies to stable. This book is designed to replace all the other books and inseminate that recent developed technology and advances. The material in standard books is so entrenched, old, and outdated material that one can be only amazed. For example, concept like potential stability is not discussed or even mentioned in any of all the books that this author review.

This book written from physical point of view rather then construction point of view like all the books review by this author on stability. It is hoped that the book could be used as a reference book for people who have at least some basics knowledge of science areas such as algebra, basic physics, etc. Even without deep understating the graphs in this book can be used to find necessarily quantities needed to understand if to fix your vessel.

This work complements the Applied Strength of Materials for Engineering Technology by Barry Dupen and is used in teaching Strength of Materials to Power Engineering students.

This book provides an introduction, at academic level, into the field of surveying and mapping. The book has been compiled based on hand-outs and readers written for the third-year course Surveying and Mapping, in the bachelor program Civil Engineering at Delft University of Technology. This book covers a wide range of measurement techniques, from land surveying, GPS/GNSS and remote sensing to the associated data processing, the underlying coordinate reference systems, as well as the analysis and visualization of the acquired geospatial information.

Technology has changed dramatically over the last couple of decades. Currently, virtually all business industries are powered by large quantities of data. The potential as well as actual uses of business data, which oftentimes includes personal user data, raise complex issues of informed consent and data protection. This course will explore many of these complex issues, with the goal of guiding students into thinking about tech policy from a broad ethical perspective as well as preparing students to responsibly conduct themselves in different areas and industries in a world growingly dominated by technology.

Technical Project Management in Living and Geometric Order demonstrates that even the best-laid project plans can be undone by new technologies, financial upheavals, or resource scarcity, to name just a few disruptors. It encourages project managers to focus on learning throughout a project, with the understanding that what they learn could necessitate major changes in midstream. This adaptive, flexible, living-order approach is inspired by Lean in construction projects and Agile in software development. Technical Project Management in Living and Geometric Order explains how today’s projects unfold in dynamic environments in response to unexpected events. With its practical tips, detailed graphics, links to additional resources, and interviews with engineering professionals, it’s an accessible introduction to the living order for aspiring project managers.

Tennessee State University Open Education Resource - Affordable Learning Solutions Webpage Portal for post-secondary content across higher education academic disciplines in partnership with www.MERLOT.org.

Traffic processes cause several problems in the world. Traffic delay, pollution are some of it. They can be solved with the right road design or traffic management (control) measure. Before implementing these designs of measures, though, their effect could be tested. To this end, knowledge of traffic flow theory is needed.

Traffic processes cause several problems in the world. Traffic delay, pollution are some of it. They can be solved with the right road design or traffic management (control) measure. Before implementing these designs of measures, though, their effect could be tested. To this end, knowledge of traffic flow theory is needed.

This is an entry level blueprint reading book written for the first year welding student. The book will be used in the first term of a two year welding program to familiarize the student to sketching and reading blueprints.

Web Accessibility for Developers is a technical book aimed primarily at programmers. Learn how to develop accessible interactivity on the Web and gain expertise using WAI-ARIA, a W3C specification that enables optimal use of assistive technologies, like screen readers, when navigating the Web.

Recording of Day 1 of the Three Branches Institute, featuring a condensed version of WHHA's "White House 101" lecture, exploration of WHHA's 360 Virtual Tour of the White House, and some discussion.

Please note that there will be "dead air" during the mid program break as well as the second half breakout rooms.

This book contains power points, worksheets, and content on
1. Why Wind Energy

2. Wind Energy in Iowa

3. Power from Wind

4. HAWT vs. VAWT

5. Why Are Turbine Blades in Groups of 3?

6. Theoretical Power of Wind

7. Components of a Wind Generator